How to Use the Artificial Turf Quantity Calculator
Artificial turf is installed in whole roll-width strips, so simply matching your total area to a roll count often leaves you short. This calculator takes your install area and roll width/length and tells you exactly how many rolls to order, plus how much area you'll actually end up with once you round up to full rolls.
The math works by first applying your waste factor to get the required area, dividing that by roll width to get the total length needed, then rounding up to whole rolls based on roll length. Because turf can only be cut in roll-width increments, your final order area will typically be a bit larger than your raw install area — that's expected and normal.
Your waste factor should reflect the shape of the site. A simple rectangular lawn needs only about 5%, while a yard with curves, planting beds, or other obstacles can lose 10-15% to cutting and seam overlap. Standard turf rolls are commonly 12-15 ft wide, but always confirm the exact width and length with your supplier before ordering.
Frequently Asked Questions
Use around 5% for simple rectangular yards, and 10-15% for curved edges or lots with planters and obstacles. This accounts for cutting losses and seam overlaps.
Since turf is cut in whole roll-width increments, this calculator rounds up the roll count, so the actual order area is usually a bit larger than your install area. Leftover scraps can be used for narrow strips or curved sections.