Working out how many folded shirts a drawer holds is simple with a tape measure and tedious by hand. Enter the inside width, depth and height of the drawer, the width, depth and height of one folded item, and the clearance you want at the walls. The tool returns the count along each axis, the product of the three as a total, and the space left over in each direction.
Three assumptions drive the result. Clearance is subtracted once per axis as a wall allowance, gaps between items are treated as zero, and turning an item sideways is not calculated. Because the question is how many fit, each axis count is rounded down. Measure the drawer from its inside faces, and measure the folded item at its longest point once folded (as of October 2026).
No authoritative recommended clearance is offered here. Widely used figures exist but are not confirmed in an authoritative source, and the right value depends on the drawer and the thickness of the garments, which is why clearance is an input. Folding technique and storage temperature or humidity are not covered. Follow the guidance from the furniture and garment makers first.
Frequently Asked Questions
No authoritative recommended value is offered here, because it depends on the drawer and the thickness of the garments. Enter the figure you want and it is subtracted once along each axis before the count.
Because the question is how many actually fit. If the math says 2.8 items, only 2 go in, so rounding down is correct. The space left over is reported separately.
It might, but this tool does not calculate rotated layouts. You can swap the width and depth values and run it twice to compare.